& 骗子邮件汇总
查看: 6550|回复: 79
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
来公司三个多月了，骗子邮件也收了好多，忽然想汇总于此。
我先不占楼，你发完我在评论
总评分:&金币 + 20&
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
WE WANT TO BUY YOUR PRODUCT& &
发件人：DIMASSI SADOK && 拒收& &
时& &间：日(星期一) 上午6:14
Dear Sir/Madam,
We are interested in purchasing your products and we sincerely hope to establish a long-term business relation with your esteemed company.
Please send us details of your product, enable us place our order.
Your early reply is highly appreciated.
Thank You!
Mr.JOHN SMITH
saudi&&lamino& &company ,LTD
Tel:&&+1 80- 687-31056 (Monday~Friday, 09:00AM-17:30PM)
Mobile: +1 80-398-2092104
Skype: saudi&&lamino
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Greetings,& &
发件人：Nancy Gospower && 拒收& &
时& &间：日(星期天) 晚上9:13
Greetings,&&
how are you today? I wish you best compliment of the day, I;m good looking girl. Well, I am sorry that I did not say much about myself because our profile cannot say everything about us. I want to discuss with you an important issue, kindly reach me back with my ID () urgent. Yours Sincerely, Miss Nancy
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Fw: PO 400261& &
发件人：mizan.ctg && 拒收& &
时& &间：日(星期一) 凌晨0:04&&
收件人： Recipients &&
Sorry for the delay in confirming order due to change in&&management, once again kindly confirm our price change for items #3 and #5 as per attached order and give us your final invoice for arrange deposit. appreciate an urgent response.&&Customer is impatient and needs delivery on or before the 20th&&of Sept.
John Gatfield
General Manager
Sumner Mfg UK Ltd.
mailto:rogan@orzelsa.nazwas.pl
Telephone: +44 (0)
Facsimile:&&+44 (0)
-----Original Message-----
From: Rupert Organ
Sent: 4Aug
To: John Gatfield
Subject: FW: PO 400261
-----Original Message-----
From: Jervin
Sent: 4 Aug
To: Rupert Organ
Subject: FW: PO 400261
Please find attached Spare Part required.
Please send asap.
jaydee1244:
Jervin Devassy
Powered Access Department
Mob: 050 4598211
Al Laith Scaffolding LLC
-----Original Message-----
Sent: Thursday, August 24,
To: jervin
This E-mail was sent from &RICOHMPC2800& (Aficio MP C2800).
Scan Date: 24.07.:23 (+0200)
附件(1 个)
普通附件 (已通过电脑管家云查杀引擎扫描)& &附件预览
&这一封邮件我也有收到过，还是一模一样的，看到PO就激动了，不过冷静想想，很可疑，我又没有这样的客户，骗子成分居多，就没有理会了。&
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Products Inquiry& &
发件人：SPX GLOBAL && 拒收& &
时& &间：日(星期六) 上午10:23&&
收件人： rpxg &&
Hello Dear,
We are sure that this mail is going to meet you well. We are interested in purchasing from your company's products
and we would like to make a few inquiries on delivery and payments analysis. However, we would like to see a few
of your company's latest catalogs and prices lists for a closer approaches.
We look forward to hearing from you soon.Kindly contact us back ASAP
Nicole Evans
Purchasing M
Purchasing Department
RPX Global 13320 Ballantyne Corporate Place
Charlotte, North Carolina 28267
Tel.: +1 704 752 4400
Fax:&&+1 704 752 4422
=============================================
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
发件人：kalcany kalcany
时& &间：日(星期二) 上午7:28
greetings from mr kalcany
our company located at Bangkok Thailand but we are from America .
right now as we are searching for some product along the line we saw your product and and is one of what we needed thats why am sending my mail to you , meanwhile I will need to see your new catarloge so that I will pick up my choice there but pls we need best
price and how long it will take you to get things ready so that I will book my other because there is no time now , please try to get back to me as soon as you get my mail .
Thanks and
best regards
Mr.kalcany
Purchase and Supply Chain Manager INC .
KALCANY AND COMPANY
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
本帖最后由 Lisalovespeace 于
18:59 编辑
本只想汇总骗子邮件，却变成整理邮箱了，太棒了
总是发信息 很容易疲惫 无法言说的疲惫
好难承受&&信息的背后刻着一道孤独
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Re:Thank you for responding to my email,& &
发件人：Nancy Gospower && 拒收& &
时& &间：日(星期一) 上午10:43
Hello My Dearest Lisa!!
Thanks, I consider it a privilege for you to give a prompt response to my mail and also I am responding with a little explanation of the things about me and what we need to do making the way for us to know each other better. Because I believe that race, colour, neither nationality nor religion will be a barrier to people’s relationship. Although we’ve not met before, but I will really like to have you as my close friend forever. My name is Miss Nancy S Gospower. I am from Cote d'ivoire in West Africa and presently i am residing in a church orphanage home here in Dakar Senegal as a result of the civil war that took place in my country some months ago. I am 23 years old, single and never married . 5ft 8 inches tall, 55kg weight, black hair and brown eyes. I love singing, watching television, reading books cooking good food, i am respectful, honest, sincere etc, I hate lies , dishonest people, promise and fail, taking others for granted , disobeying
God, etc. My hobbies include taking care of people, sports like football and hand ball, going to beach with my friends, etc.
Actually the reason why I decided to contact you in my first email, was for us to be best of friends due to the urgency of my situation which I am facing in this country today, I lost my both parents during this deadly political war that damaged thousands of innocent souls in Cote d'ivoire. My family was among the first target of the rebels because my late father was a successful businessman and also a politician supporting the present government when the problems was about to start. Due to this all the members of my family was murdered in a cold blood and our family house was set blazed. I was lucky and escaped death because i was in Higher school when this deadly incident took place . It is only myself who is alive now and i managed to make my way to a nearby country, Senegal, where i am staying now and never pray or think to step my legs in that bloody country called Cote d'ivoire. I am hoping for a day i will be totally free from the pains and
shackles of life. I have encountered pain and suffering ever since i lost my parents but i know that someday i will wear a smile on my face again.I have much to tell you.
However i want to know if you are willing and ready to help me smile again. To help me become somebody in the society. To give me a better life. Something has been bothering me and i have kept it to myself because i am afraid to disclose it to anyone. I am afraid of betrayal. I am afraid someone might take advantage of me if i should disclose it to anyone. I have been praying to God to give me someone who will not betray my trust and confidence in him . Someone who will not cheat and deceive me. I am very much afraid . But if you will promise me that you will stand for me as a guardian, a friend indeed, good Samaritan then i will open up to you .I would like to know more about you. Your real names , your likes and dislikes, your hobbies, and what you are doing presently.I will tell you more about myself in my next mail. I pray to God to guide and protect you in all you are doing. Have a wonderful moment. Hope to hear from you soon.
Thank you, with Love,
Yours Friend,
Miss Nancy.
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Re-Sample Product
[url=][/url]
发件人：Foreign Trade Department, && 拒收时& &间：日(星期一) 下午5:10[url=][/url]附& &件：
1 个 ( PO_#_09_2014_Signed.zip )
大& &小：257K 打印 | 新窗口读信 | 邮件有乱码 | 导出为eml文件 | 创建收信规则
[url=]编辑[/url]删除
请在此输入备注... [url=]保 存[/url][url=]取消[/url]
标记：已将此邮件标记为星标邮件。 取消星标
Hello good day,
We are Jingling Brothers Int'l Co.Ltd, Could you send us your current price list/catalogs? We are interested
to order your product to be supplied in our market urgently and it would b also what is
the Expected time of Delivery to USA?
(1) Kindly send FOB prices and Ex-work,
(2) Inform Expected time of Delivery?
(3) Payment term? (T/T or L/C preferred)
Please respond as soon as possible as this order is very urgent,&&Also attached is the video of the product
needed by us along with our purchase order.
Thank you.
Foreign Trade Department,
Jingling Brothers Int'l Co.Ltd.
附件(1 个)
普通附件 (已通过电脑管家云查杀引擎扫描)& &附件预览
[url=][/url]
PO_#_09_2014_Signed.zip (184.61K) &&&&预览
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子积分3251UID364259
外贸总监, 积分 3251, 距离下一级还需 1749 积分
金币3653 威望3256 功勋币0 听众数注册时间最后登录在线时间281 小时帖子
Please find attached Purchase Order
发件人：Amani Trading Co. && 拒收& &
时& &间：日(星期二) 凌晨0:41
Dear (我的邮箱地址),
Please find attached Purchase Order
for the new order. Confirm receipt.
and Please Ready Our PI. For This Order
Hazan Malik
Amani Trading Co.
Add: Box No. 64556, Dubai, Emirates - Manager
Direct Line: +01 917-864-8849
1 attachments (total 53.9 KB)
View slide show (1)Download all as zip
& 骗子邮件汇总
站长推荐 /2
十月份来了，我们的外贸路是否有大的突破，黄金季节有没有做好战备措施。
分享你的备战计划，做个外贸达人，抓住外国友人采购旺季，总结自己最近需要做的工作，大家共同学习进步。
在正式使用宜选网订单易服务之前，我们需要您完成以下步骤：
1.注册宜选网账号
2.加入订单易服务
3.公司实名认证
4.发布产品信息
Powered by Discuz! X2.5
Copyright (C) . All rights reserved.Your question
&&&Cannot find NWLink IPX/SPX/NetBIOS compatible transport pr..&
Archived from groups: microsoft.public.windowsxp.newusers ()
Toni wrote:
& nHi There!. I need this protocol to complete a Direct Cable
& Connection. It's not included in the installation CD XP
& professional 2002, and not available as a download in MS
& downloading center. Where can I find it?.
You might want to take a look at this article:
;en-814987&Product=winxp
Archived from groups: microsoft.public.windowsxp.newusers ()
Thank you. The article is good and actually I went thru every step. However,
the problem is that I dont have the NWLink protocol in my installation kit,
so my question is where can I find it?. This file is part of windows XP, it
has nothing to do with the cable manufacturer.
I'd appretiate more help
"Nepatsfan" wrote:
& Toni wrote:
& & nHi There!. I need this protocol to complete a Direct Cable
& & Connection. It's not included in the installation CD XP
& & professional 2002, and not available as a download in MS
& & downloading center. Where can I find it?.
& & Regards
& You might want to take a look at this article:
& ;en-814987&Product=winxp
& Good luck
& Nepatsfan
Can't find your answer ? Ask !
Archived from groups: microsoft.public.windowsxp.newusers ()
1-5 on that link tells you how to install it, you will need your XP cd.
The best live web video on the internet
NEW Embedded system
W/Linux. We now sell DVR cards.
See it all at
Sharpvision simply the best
"Toni" &Toni@& wrote in message
news:E14-4C14-8AD0-...
& Thank you. The article is good and actually I went thru every step.
& However,
& the problem is that I dont have the NWLink protocol in my installation
& so my question is where can I find it?. This file is part of windows XP,
& has nothing to do with the cable manufacturer.
& I'd appretiate more help
& "Nepatsfan" wrote:
&& Toni wrote:
&& & nHi There!. I need this protocol to complete a Direct Cable
&& & Connection. It's not included in the installation CD XP
&& & professional 2002, and not available as a download in MS
&& & downloading center. Where can I find it?.
&& & Regards
&& You might want to take a look at this article:
&& ;en-814987&Product=winxp
&& Good luck
&& Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
Thanks but unfortunately this device is NOT in the XP CD. That's why I am
looking for help
"pcbutts1" wrote:
& 1-5 on that link tells you how to install it, you will need your XP cd.
& The best live web video on the internet
& NEW Embedded system
W/Linux. We now sell DVR cards.
& See it all at
& Sharpvision simply the best
& "Toni" &Toni@& wrote in message
& news:E14-4C14-8AD0-...
& & Thank you. The article is good and actually I went thru every step.
& & However,
& & the problem is that I dont have the NWLink protocol in my installation
& & so my question is where can I find it?. This file is part of windows XP,
& & has nothing to do with the cable manufacturer.
& & I'd appretiate more help
& & "Nepatsfan" wrote:
& && Toni wrote:
& && & nHi There!. I need this protocol to complete a Direct Cable
& && & Connection. It's not included in the installation CD XP
& && & professional 2002, and not available as a download in MS
& && & downloading center. Where can I find it?.
& && & Regards
& && You might want to take a look at this article:
& && ;en-814987&Product=winxp
& && Good luck
& && Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
The cable manufacturer.
Toni wrote:
& nHi There!. I need this protocol to complete a Direct Cable Connection. It's
& not included in the installation CD XP professional 2002, and not available
& as a download in MS downloading center. Where can I find it?.
Oderient dum Metuant
Archived from groups: microsoft.public.windowsxp.newusers ()
Toni wrote:
& Thank you. The article is good and actually I went thru
& every step. However, the problem is that I dont have the
& NWLink protocol in my installation kit, so my question is
& where can I find it?. This file is part of windows XP, it
& has nothing to do with the cable manufacturer.
& I'd appretiate more help
Where in the process of trying to install NWLink are you
running into problems? You've got to provide more info than you
have so far. You're asking people who are not sitting in front
of your computer to help you with a problem. They can't see
what you're doing. The statement "I don't have the NWLink
protocol in my installation kit" tells me nothing.
In a standard installation of Windows XP, Home or Professional,
all the files necessary to enable the NWLink protocol are
installed by default. It's just a matter of adding it to your
network connection. Who installed XP on your computer? It's
possible that NWLink was not included in the original
installation.
Also, is this PC part of a domain? If it is, a Group Policy
could be in place to prevent the installation. It also would be
helpful to know why you need to install NWLink. More details
concerning the Direct Cable Connection you're trying to
establish might be helpful.
Getting back to your problem. go back to the article I posted
In step 5 of that article, is NWLink IPX/SPX/NetBIOS Compatible
Transport Protocol listed in the Select Network Protocol box?
If it's not listed, click on the "Have Disk" button and browse
to C:\Windows\Inf\netnwlnk.inf.
FYI, the setup file for the NWLink protocol should be located
on your computer here:
C:\Windows\Inf\netnwlnk.inf
You should also have these files installed on your PC
C:\Windows\System32\Drivers\nwlnkipx.sys
C:\Windows\System32\Drivers\nwlnknb.sys
C:\Windows\System32\Drivers\nwlnkspx.sys
C:\Windows\System32\Drivers\nwlnkflt.sys
C:\Windows\System32\Drivers\nwlnkfwd.sys
If you continue to run into problems, you should consider
running a repair installation of XP. Take a look here for more
details on that procedure:
& "Nepatsfan" wrote:
&& Toni wrote:
&&& nHi There!. I need this protocol to complete a Direct Cable
&&& Connection. It's not included in the installation CD XP
&&& professional 2002, and not available as a download in MS
&&& downloading center. Where can I find it?.
&&& Regards
&& You might want to take a look at this article:
&& ;en-814987&Product=winxp
&& Good luck
&& Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
Yes it is, you must be doing something wrong. What happens when you try.
What error message?
The best live web video on the internet
NEW Embedded system
W/Linux. We now sell DVR cards.
See it all at
Sharpvision simply the best
"Toni" &Toni@& wrote in message
news:ABA7F59C-ABFC-4A54-A1E5-...
& Thanks but unfortunately this device is NOT in the XP CD. That's why I am
& looking for help
& "pcbutts1" wrote:
&& 1-5 on that link tells you how to install it, you will need your XP cd.
&& The best live web video on the internet
&& NEW Embedded system
W/Linux. We now sell DVR cards.
&& See it all at
&& Sharpvision simply the best
&& "Toni" &Toni@& wrote in message
&& news:E14-4C14-8AD0-...
&& & Thank you. The article is good and actually I went thru every step.
&& & However,
&& & the problem is that I dont have the NWLink protocol in my installation
&& & so my question is where can I find it?. This file is part of windows
&& & has nothing to do with the cable manufacturer.
&& & I'd appretiate more help
&& & "Nepatsfan" wrote:
&& && Toni wrote:
&& && & nHi There!. I need this protocol to complete a Direct Cable
&& && & Connection. It's not included in the installation CD XP
&& && & professional 2002, and not available as a download in MS
&& && & downloading center. Where can I find it?.
&& && & Regards
&& && You might want to take a look at this article:
&& && ;en-814987&Product=winxp
&& && Good luck
&& && Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
I receive no error message but 'Windows cannot find the driver for this
device'. I tried in the CD and it is not either.
"pcbutts1" wrote:
& Yes it is, you must be doing something wrong. What happens when you try.
& What error message?
& The best live web video on the internet
& NEW Embedded system
W/Linux. We now sell DVR cards.
& See it all at
& Sharpvision simply the best
& "Toni" &Toni@& wrote in message
& news:ABA7F59C-ABFC-4A54-A1E5-...
& & Thanks but unfortunately this device is NOT in the XP CD. That's why I am
& & looking for help
& & regards
& & "pcbutts1" wrote:
& && 1-5 on that link tells you how to install it, you will need your XP cd.
& && The best live web video on the internet
& && NEW Embedded system
W/Linux. We now sell DVR cards.
& && See it all at
& && Sharpvision simply the best
& && "Toni" &Toni@& wrote in message
& && news:E14-4C14-8AD0-...
& && & Thank you. The article is good and actually I went thru every step.
& && & However,
& && & the problem is that I dont have the NWLink protocol in my installation
& && & kit,
& && & so my question is where can I find it?. This file is part of windows
& && & XP,
& && & has nothing to do with the cable manufacturer.
& && & I'd appretiate more help
& && & "Nepatsfan" wrote:
& && && Toni wrote:
& && && & nHi There!. I need this protocol to complete a Direct Cable
& && && & Connection. It's not included in the installation CD XP
& && && & professional 2002, and not available as a download in MS
& && && & downloading center. Where can I find it?.
& && && & Regards
& && && You might want to take a look at this article:
& && && ;en-814987&Product=winxp
& && && Good luck
& && && Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
My apologies for not giving people precise information on the problem. I did
my homework following your suggestions, and couldn't find this file in my
computer nor in my XP CD: C:\Windows\Inf\netnwlnk.inf.
However, the other .sys files that you mentioned are.
I need this driver to connect a
home XP system (guest) and a W95 based
laptop (host). Followed all the steps to make it and they actually connected
but I cannot map a drive. I receive a message that says 'cannot find the
other computer' or something like that. But the computers listen to each
other. The only missing piece of the conection process is the lack of such
protocol. Reviewing some literature on the net (sorry I don't remember the
source) found that without this device the computers get connected but cannot
share resources (which is my case).
I copied the file from another XP based computer and couldn't instal it
either because it is not digitally signed. So I'm stuck.
My XP disc is 2002, version 5.1, service pack 2. Looks old!. I wonder if
such a protocol doesn't have another name in this pack?
Well, I appretiate so many efforts of very bussy people to help me. I thank
you all and am proud of taking part on this discusion. And if there's any
other chance to try another resource, it's very welcome. Best regards
"Nepatsfan" wrote:
& Toni wrote:
& & Thank you. The article is good and actually I went thru
& & every step. However, the problem is that I dont have the
& & NWLink protocol in my installation kit, so my question is
& & where can I find it?. This file is part of windows XP, it
& & has nothing to do with the cable manufacturer.
& & I'd appretiate more help
& Where in the process of trying to install NWLink are you
& running into problems? You've got to provide more info than you
& have so far. You're asking people who are not sitting in front
& of your computer to help you with a problem. They can't see
& what you're doing. The statement "I don't have the NWLink
& protocol in my installation kit" tells me nothing.
& In a standard installation of Windows XP, Home or Professional,
& all the files necessary to enable the NWLink protocol are
& installed by default. It's just a matter of adding it to your
& network connection. Who installed XP on your computer? It's
& possible that NWLink was not included in the original
& installation.
& Also, is this PC part of a domain? If it is, a Group Policy
& could be in place to prevent the installation. It also would be
& helpful to know why you need to install NWLink. More details
& concerning the Direct Cable Connection you're trying to
& establish might be helpful.
& Getting back to your problem. go back to the article I posted
& earlier.
& In step 5 of that article, is NWLink IPX/SPX/NetBIOS Compatible
& Transport Protocol listed in the Select Network Protocol box?
& If it's not listed, click on the "Have Disk" button and browse
& to C:\Windows\Inf\netnwlnk.inf.
& FYI, the setup file for the NWLink protocol should be located
& on your computer here:
& C:\Windows\Inf\netnwlnk.inf
& You should also have these files installed on your PC
& C:\Windows\System32\Drivers\nwlnkipx.sys
& C:\Windows\System32\Drivers\nwlnknb.sys
& C:\Windows\System32\Drivers\nwlnkspx.sys
& C:\Windows\System32\Drivers\nwlnkflt.sys
& C:\Windows\System32\Drivers\nwlnkfwd.sys
& If you continue to run into problems, you should consider
& running a repair installation of XP. Take a look here for more
& details on that procedure:
& Good luck
& Nepatsfan
& & "Nepatsfan" wrote:
& && Toni wrote:
& &&& nHi There!. I need this protocol to complete a Direct Cable
& &&& Connection. It's not included in the installation CD XP
& &&& professional 2002, and not available as a download in MS
& &&& downloading center. Where can I find it?.
& &&& Regards
& && You might want to take a look at this article:
& && ;en-814987&Product=winxp
& && Good luck
& && Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
Toni wrote:
& I receive no error message but 'Windows cannot find the driver for
& this device'. I tried in the CD and it is not either.
IPX/SPX is a protocol - not a driver.. have you installed the actual DRIVER
from the card manufacturer for the device?
Without a driver, it cannot
understand the IPX/SPX protocol - that is for sure.
Shenan Stanley
How To Ask Questions The Smart Way
Archived from groups: microsoft.public.windowsxp.newusers ()
I'm guessing your laptop doesn't have an ethernet card
installed? If it has one, it's a much simpler procedure to
connect two computers with a crossover cable than it is to use
the method you're trying to setup.
It's been awhile since I've had to setup a direct cable
connection but I seem to recall that having the TCP/IP protocol
installed on both computers was sufficient to establish the
connection. Why aren't you using TCP/IP?
Since you don't have the NWLink installation files on your
computer, you will need to copy them from your XP installation
CD. Here's how:
The following assumes that Windows is installed on C and your
CD drive is D. If they're not, use the correct drive letters.
Put your installation CD in the drive.
Open a command prompt window by going to Start -& Run and
entering cmd.exe in the Open box.
Enter the following in the command prompt window,
Expand D:\I386\netnwlnk.in_ C:\Windows\Inf\netnwlnk.inf
Note: There's a space between netnwlnk.in_ and C:\. Also, you
can copy and paste that line to insure it's entered correctly.
Hit the enter key.
You should see a message about the file being expanded.
Close the command prompt window.
Go back to your connection setup and see if you can install
You may have already referenced these two articles, but I'm
passing them on just in case you haven't seen them:
Unable to Connect Using Direct Cable Connection
;en-310152&Product=winxp
DCC Step-by-Step Setup For Windows 95/98/Me/2000/XP
Toni wrote:
& My apologies for not giving people precise information on
& the problem. I did my homework following your suggestions,
& and couldn't find this file in my computer nor in my XP CD:
& C:\Windows\Inf\netnwlnk.inf.
& However, the other .sys files that you mentioned are.
& I need this driver to connect a
home XP system (guest) and
& a W95 based laptop (host). Followed all the steps to make it
& and they actually connected but I cannot map a drive. I
& receive a message that says 'cannot find the other computer'
& or something like that. But the computers listen to each
& other. The only missing piece of the conection process is
& the lack of such protocol. Reviewing some literature on the
& net (sorry I don't remember the source) found that without
& this device the computers get connected but cannot share
& resources (which is my case).
& I copied the file from another XP based computer and
& couldn't instal it either because it is not digitally
& signed. So I'm stuck.
& My XP disc is 2002, version 5.1, service pack 2. Looks old!.
& I wonder if such a protocol doesn't have another name in
& this pack?
& Well, I appretiate so many efforts of very bussy people to
& help me. I thank you all and am proud of taking part on this
& discusion. And if there's any other chance to try another
& resource, it's very welcome. Best regards
& "Nepatsfan" wrote:
&& Toni wrote:
&&& Thank you. The article is good and actually I went thru
&&& every step. However, the problem is that I dont have the
&&& NWLink protocol in my installation kit, so my question is
&&& where can I find it?. This file is part of windows XP, it
&&& has nothing to do with the cable manufacturer.
&&& I'd appretiate more help
&& Where in the process of trying to install NWLink are you
&& running into problems? You've got to provide more info than
&& you have so far. You're asking people who are not sitting
&& in front of your computer to help you with a problem. They
&& can't see what you're doing. The statement "I don't have
&& the NWLink protocol in my installation kit" tells me
&& nothing.
&& In a standard installation of Windows XP, Home or
&& Professional, all the files necessary to enable the NWLink
&& protocol are installed by default. It's just a matter of
&& adding it to your network connection. Who installed XP on
&& your computer? It's possible that NWLink was not included
&& in the original installation.
&& Also, is this PC part of a domain? If it is, a Group Policy
&& could be in place to prevent the installation. It also
&& would be helpful to know why you need to install NWLink.
&& More details concerning the Direct Cable Connection you're
&& trying to establish might be helpful.
&& Getting back to your problem. go back to the article I
&& posted earlier.
&& In step 5 of that article, is NWLink IPX/SPX/NetBIOS
&& Compatible Transport Protocol listed in the Select Network
&& Protocol box? If it's not listed, click on the "Have Disk"
&& button and browse to C:\Windows\Inf\netnwlnk.inf.
&& FYI, the setup file for the NWLink protocol should be
&& located on your computer here:
&& C:\Windows\Inf\netnwlnk.inf
&& You should also have these files installed on your PC
&& C:\Windows\System32\Drivers\nwlnkipx.sys
&& C:\Windows\System32\Drivers\nwlnknb.sys
&& C:\Windows\System32\Drivers\nwlnkspx.sys
&& C:\Windows\System32\Drivers\nwlnkflt.sys
&& C:\Windows\System32\Drivers\nwlnkfwd.sys
&& If you continue to run into problems, you should consider
&& running a repair installation of XP. Take a look here for
&& more details on that procedure:
&& Good luck
&& Nepatsfan
&&& "Nepatsfan" wrote:
&&&& Toni wrote:
&&&&& nHi There!. I need this protocol to complete a Direct
&&&&& Cable Connection. It's not included in the installation
&&&&& CD XP professional 2002, and not available as a download
&&&&& in MS downloading center. Where can I find it?.
&&&&& Regards
&&&& You might want to take a look at this article:
&&&& ;en-814987&Product=winxp
&&&& Good luck
&&&& Nepatsfan
Archived from groups: microsoft.public.windowsxp.newusers ()
Here is your file, cut and paste it into notepad then save it as
netnwlnk.inf make sure you change the save as..... drop down box to all
files. put the file in the correct location c:/windows/inf then right click
on it to install it. Cut everything between the top and bottom lines. Let us
know if it works. This file came from my XP Pro system.
start cut bellow this line
====================================================================================
;-------------------------------------------------------------------------
; NWLINK IPX/SPX -- Microsoft NWLink Services
; Copyright (c) , Microsoft Corporation
;-------------------------------------------------------------------------
= "$Windows NT$"
= NetTrans
= {4d36e975-e325-11ce-bfc1-0}
LayoutFile
= layout.inf
DriverVer=07/01/.2535.0
[Manufacturer]
%Msft%=MSFT
%NwlnkIpx_Desc%=Install_Ipx, MS_NWIPX
%NwlnkNb_Desc%=Install_Nb, MS_NWNB
%NwlnkSpx_Desc%=Install_Spx, MS_NWSPX
[ControlFlags]
ExcludeFromSelect=MS_NWNB,MS_NWSPX
;=========================================================================
; NWLINK IPX Section
;=========================================================================
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK IPX Installation
;-------------------------------------------------------------------------
[Install_Ipx]
Characteristics=0x80 NCF_HAS_UI
AddReg=Inst_Ndi_I Specify the [N]etwork [d]evice nstaller
;-------------------------------------------------------------------------
; Specify the Network Device Installer
;-------------------------------------------------------------------------
[Inst_Ndi_Ipx]
HKR, Ndi, ClsID,,"{c59938da-9b20-11d0-9ce3-00c04fc9bcc4}"
HKR, Ndi, Service,,"NwlnkIpx"
HKR, Ndi, CoServices,0x10000,"NwlnkIpx","NwlnkNb","NwlnkSpx"
HKR, Ndi, HelpText,,"@netcfgx.dll,-50013"
HKR, Ndi\Interfaces, UpperRange,,"ipx"
HKR, Ndi\Interfaces, LowerRange,,"ndis5,ndis4,ndiswanipx,ndis5_ipx"
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK IPX Service Installation
;-------------------------------------------------------------------------
[Install_Ipx.Services]
AddService=NwlnkIpx,,NwlnkIpx_Service_Inst
;-------------------------------------------------------------------------
; Entry Point for the NWLINK IPX Service's SNMP Dependency Installation
;-------------------------------------------------------------------------
[Install_Ipx.SNMPAgent]
= Install_Ipx.AddIpxSNMPAgent
[Install_Ipx.Remove.SNMPAgent]
= Install_Ipx.DelIpxSNMPAgent
[Install_Ipx.AddIpxSNMPAgent]
ServiceName = "nwlnkipx"
= "IPXMibAgent"
= "%SystemRoot%\System32\rtipxmib.dll"
[Install_Ipx.DelIpxSNMPAgent]
= "IPXMibAgent"
;-------------------------------------------------------------------------
; Entry Point for the NWLINK IPX Service's Winsock Dependency Installation
;-------------------------------------------------------------------------
[Install_Ipx.Winsock]
AddSock=Inst_Ipx_Winsock_Dependency
[Inst_Ipx_Winsock_Dependency]
TransportService=nwlnkipx
HelperDllName="%SystemRoot%\System32\wshisn.dll"
MaxSockAddrLength=0x10
MinSockAddrLength=0xe
LibraryPath="%SystemRoot%\System32\nwprovau.dll"
DisplayString=%NwlnkIpx_Desc%
SupportedNameSpace=1
ProviderId="{e02daaf0-7e9f-11cf-ae5a-00aa00a7112b}"
;-------------------------------------------------------------------------
; IPX Service Definitions and Settings
;-------------------------------------------------------------------------
[NwlnkIpx_Service_Inst]
DisplayName=%NwlnkIpx_Desc%
ServiceType=1
StartType=2
ErrorControl=1
ServiceBinary=%12%\nwlnkipx.sys
LoadOrderGroup="PNP_TDI"
AddReg=AddReg_NwlnkIpx_Service_Inst
Description=%NwlnkIpx_Desc%
;-------------------------------------------------------------------------
; IPX Service Installation Registry Settings
;-------------------------------------------------------------------------
[AddReg_NwlnkIpx_Service_Inst]
HKLM,"System\CurrentControlSet\Control\ServiceProvider\Order","ExcludedProviders",0x2,""
HKLM,"System\CurrentControlSet\Control\ServiceProvider\Order","ProviderOrder",0x1000A,"NwlnkIpx"
HKR,"ServiceProvider","Class",0x
HKR,"ServiceProvider","Name",,%NwlnkIpx_Desc%
HKR,"ServiceProvider","ProviderPath",0x20000,"%SystemRoot%\System32\nwprovau.dll"
HKR,"Performance","Library",,"perfctrs.dll"
HKR,"Performance","Open",,"OpenIPXPerformanceData"
HKR,"Performance","Close",,"CloseIPXPerformanceData"
HKR,"Performance","Collect",,"CollectIPXPerformanceData";
HKLM,"System\CurrentControlSet\Services\EventLog\System\NwlnkIpx","EventMessageFile",0x20000,"%%SystemRoot%%\system32\netevent.dll"
HKLM,"System\CurrentControlSet\Services\EventLog\System\NwlnkIpx","TypesSupported",0x10001,
HKR,"Parameters","RipRoute",0x
;-------------------------------------------------------------------------
; Section for driving removal of static IPX registry settings
;-------------------------------------------------------------------------
[Install_Ipx.Remove]
DelReg=DelReg_Remove_Static_Ipx
[Install_Ipx.Remove.Services]
DelService=NwlnkIpx
;-------------------------------------------------------------------------
; Entry Point for the NWLINK IPX Service's Winsock Dependency removal
;-------------------------------------------------------------------------
[Install_Ipx.Remove.Winsock]
DelSock=Del_Ipx_Winsock_Dependency
[Del_Ipx_Winsock_Dependency]
TransportService=nwlnkipx
ProviderId="{e02daaf0-7e9f-11cf-ae5a-00aa00a7112b}"
;-------------------------------------------------------------------------
; Specify IPX static registry entries to remove
;-------------------------------------------------------------------------
[DelReg_Remove_Static_Ipx]
HKLM,"Software\Microsoft\Rpc\Protocols","ncacn_nb_ipx"
HKLM,"Software\Microsoft\Rpc\ClientProtocols","ncacn_nb_ipx"
HKLM,"System\CurrentControlSet\Services\EventLog\System\NwlnkIpx"
;=========================================================================
; NWLINK NetBIOS Section
;=========================================================================
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK NetBIOS Installation
;-------------------------------------------------------------------------
[Install_Nb]
Characteristics=0x2020 NCF_HIDE_BINDING | NCF_NOT_USER_REMOVABLE
AddReg=Inst_Ndi_Nb
;-------------------------------------------------------------------------
; Specify the Network Device Installer
;-------------------------------------------------------------------------
[Inst_Ndi_Nb]
HKR,Ndi,ClsID,,"{050da15f-9f13-11d0-9ce5-00c04fc9bcc4}"
HKR,Ndi,Service,,"NwlnkNb"
HKR,Ndi,HelpText,,"@netcfgx.dll,-50014"
HKR,Ndi\Interfaces,UpperRange,,"netbios"
HKR,Ndi\Interfaces,LowerRange,,"ipx"
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK NetBIOS Service Installation
;-------------------------------------------------------------------------
[Install_Nb.Services]
AddService=NwlnkNb,,NwlnkNb_Service_Inst
;-------------------------------------------------------------------------
; NetBIOS Service Definitions and Settings
;-------------------------------------------------------------------------
[NwlnkNb_Service_Inst]
DisplayName=%NwlnkNb_Desc%
ServiceType=1
StartType=2
ErrorControl=1
ServiceBinary=%12%\nwlnknb.sys
LoadOrderGroup="PNP_TDI"
AddReg=AddReg_NwlnkNb_Service_Inst
Description=%NwlnkNb_Desc%
;-------------------------------------------------------------------------
; NetBios Service Installation Registry Settings
;-------------------------------------------------------------------------
[AddReg_NwlnkNb_Service_Inst]
HKR,"Parameters","NbProvider",,"_ipx"
HKR,"Parameters","KeepaliveTimeout",0x10001,60
HKR,"Parameters","KeepaliveCount",0x10001,8
HKR,"Parameters","ConnectionTimeout",0x10001,2
HKR,"Parameters","ConnectionCount",0x10001,5
HKR,"Parameters","BroadcastCount",0x10001,3
HKR,"Parameters","Internet",0x10001,1
HKR,"Performance","Library",,"perfctrs.dll"
HKR,"Performance","Open",,"OpenNWNBPerformanceData"
HKR,"Performance","Close",,"CloseNWNBPerformanceData"
HKR,"Performance","Collect",,"CollectNWNBPerformanceData"
;-------------------------------------------------------------------------
; Section for driving removal of static NetBios registry settings
; and the deletion of the NetBios service
;-------------------------------------------------------------------------
[Install_Nb.Remove]
DelReg=DelReg_Remove_Static_Nb
[Install_Nb.Remove.Services]
DelService=NwlnkNb
;-------------------------------------------------------------------------
; Specify NetBios static registry entries to remove
;-------------------------------------------------------------------------
[DelReg_Remove_Static_Nb]
;=========================================================================
; NWLINK SPX Section
;=========================================================================
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK SPX Installation
;-------------------------------------------------------------------------
[Install_Spx]
Characteristics=0x2028 NCF_HIDDEN | NCF_HIDE_BINDING |
NCF_NOT_USER_REMOVABLE
AddReg=Inst_Ndi_Spx
;-------------------------------------------------------------------------
; Specify the Network Device Installer
;-------------------------------------------------------------------------
[Inst_Ndi_Spx]
HKR,Ndi,Service,,"NwlnkSpx"
HKR,Ndi,HelpText,,"%NwlnkSpx_HelpText%"
HKR,Ndi\Interfaces,UpperRange,,"spx"
HKR,Ndi\Interfaces,LowerRange,,"ipx"
;-------------------------------------------------------------------------
; Base Entry Point for NWLINK SPX Service Installation
;-------------------------------------------------------------------------
[Install_Spx.Services]
AddService=NwlnkSpx,,NwlnkSpx_Service_Inst
;-------------------------------------------------------------------------
; Entry Point for the NWLINK IPX Service's Winsock Dependency Installation
;-------------------------------------------------------------------------
[Install_Spx.Winsock]
AddSock=Inst_Spx_Winsock_Dependency
[Inst_Spx_Winsock_Dependency]
TransportService=nwlnkspx
HelperDllName="%SystemRoot%\System32\wshisn.dll"
MaxSockAddrLength=0x10
MinSockAddrLength=0xe
;-------------------------------------------------------------------------
; SPX Service Definitions and Settings
;-------------------------------------------------------------------------
[NwlnkSpx_Service_Inst]
DisplayName=%NwlnkSpx_Desc%
ServiceType=1
StartType=2
ErrorControl=1
ServiceBinary=%12%\nwlnkspx.sys
AddReg=AddReg_NwlnkSpx_Service_Inst
Description=%NwlnkSpx_Desc%
;-------------------------------------------------------------------------
; SPX Service Installation Registry Settings
;-------------------------------------------------------------------------
[AddReg_NwlnkSpx_Service_Inst]
HKLM,"Software\Microsoft\Rpc\ClientProtocols","ncacn_spx",,"rpcrt4.dll"
HKR,"Parameters","ConnectionCount",0x10001,5
HKR,"Parameters","ConnectionTimeout",0x10001,2
HKR,"Parameters","InitPackets",0x10001,5
HKR,"Parameters","MaxPackets",0x10001,48
HKR,"Parameters","InitialRetransmissionTime",0x
HKR,"Parameters","KeepaliveCount",0x10001,8
HKR,"Parameters","WindowSize",0x10001,4
HKR,"Parameters","SpxSocketRangeStart",0x
HKR,"Parameters","SpxSocketRangeEnd",0x
HKR,"Parameters","SpxSocketUniqueness",0x10001,1
HKR,"Parameters","MaxPacketSize",0x
HKR,"Parameters","RetransmissionCount",0x10001,8
HKR,"Parameters","KeepAliveTimeout",0x10001,12
HKR,"Performance","Library",,"perfctrs.dll"
HKR,"Performance","Open",,"OpenSPXPerformanceData"
HKR,"Performance","Close",,"CloseSPXPerformanceData"
HKR,"Performance","Collect",,"CollectSPXPerformanceData"
;-------------------------------------------------------------------------
; Section for driving removal of static SPX registry settings
; and the deletion of the SPX service
;-------------------------------------------------------------------------
[Install_Spx.Remove]
DelReg=DelReg_Remove_Static_Spx
[Install_Spx.Remove.Services]
DelService=NwlnkSpx
;-------------------------------------------------------------------------
; Entry Point for the NWLINK IPX Service's Winsock Dependency removal
;-------------------------------------------------------------------------
[Install_Spx.Remove.Winsock]
DelSock=Del_Spx_Winsock_Dependency
[Del_Spx_Winsock_Dependency]
TransportService=nwlnkspx
;-------------------------------------------------------------------------
; Specify SPX static registry entries to remove
;-------------------------------------------------------------------------
[DelReg_Remove_Static_Spx]
HKLM,"Software\Microsoft\Rpc\Protocols","ncadg_ipx"
HKLM,"Software\Microsoft\Rpc\ClientProtocols","ncadg_ipx"
HKLM,"Software\Microsoft\Rpc\Protocols","ncacn_spx"
HKLM,"Software\Microsoft\Rpc\ClientProtocols","ncacn_spx"
Msft = "Microsoft"
NwlnkIpx_Desc = "NWLink IPX/SPX/NetBIOS Compatible Transport Protocol"
NwlnkNb_Desc
= "NWLink NetBIOS"
NwlnkSpx_Desc = "NWLink SPX/SPXII Protocol"
NwlnkSpx_HelpText = ""
=====================================================================================
End cut above this line
The best live web video on the internet
NEW Embedded system
W/Linux. We now sell DVR cards.
See it all at
Sharpvision simply the best
"Toni" &Toni@& wrote in message
news:BEAB4DB4-6A6F-4B34-907F-...
& My apologies for not giving people precise information on the problem. I
& my homework following your suggestions, and couldn't find this file in my
& computer nor in my XP CD: C:\Windows\Inf\netnwlnk.inf.
& However, the other .sys files that you mentioned are.
& I need this driver to connect a
home XP system (guest) and a W95 based
& laptop (host). Followed all the steps to make it and they actually
& connected
& but I cannot map a drive. I receive a message that says 'cannot find the
& other computer' or something like that. But the computers listen to each
& other. The only missing piece of the conection process is the lack of such
& protocol. Reviewing some literature on the net (sorry I don't remember the
& source) found that without this device the computers get connected but
& share resources (which is my case).
& I copied the file from another XP based computer and couldn't instal it
& either because it is not digitally signed. So I'm stuck.
& My XP disc is 2002, version 5.1, service pack 2. Looks old!. I wonder if
& such a protocol doesn't have another name in this pack?
Thanks, and YES, this worked for me on my SBS 2003 server in conjunction with
some other measures. First, I copied the netnwlnk.in_ file from my SBS CD and expanded it, as well as the other files, couldn't find any netnwf* files though.
I could initially see the Netware server but no volumes were displayed, so I guess the SAP protocol part of it was working. I then created the netnwlnk.inf file you suggested by cut + paste and ran it. Now I can see all the volumes. Cheers!
Can't find your answer ? Ask !
Related resources
More resources
Read discussions in other Windows XP categories
Ask the community
Top Experts
Graphics card
SR-71 Blackbird
95207 messages since 8/18/09
6414 messages since 3/3/14
19295 messages since 8/27/13
All badges
Forum help
Latest Reports
Tom's Hardware Around the World
Subscribe to Tom's Hardware
About Tom's Hardware
Advertising
Purch Privacy Policy
Terms Of Use and Sale
Copyright Policy
Copyright & 2016
Group, Inc. All Rights ReservedTom's Hardware Guide &
Ad choices