从朝阳门内到长阳环岛东怎么坐公交车，最快需要多久？
北京公交线路繁多，要到长阳环岛东，首先要熟悉北京长阳环岛东的公交路线情况。从朝阳门内到长阳环岛东怎么走？图吧公交为您提供朝阳门内及长阳环岛东的公交驾乘信息，以及朝阳门内及长阳环岛东的相关信息。让您充分了解从朝阳门内到长阳环岛东怎么走最方便，得多久，如何乘车，打车费用多少等信息。具体路线如下：
最佳路线：
从朝阳门内到长阳环岛东大概路程34.12公里，全程约需86分钟,途经13个站点，共换乘2次，换乘车辆线路有地铁6号线→地铁9号线→835路。
具体怎么走：
从朝阳门内
约步行38.0米到朝阳门站地铁站，
乘坐地铁6号线经过7站，在白石桥南站下车；
约步行71.0米到白石桥南站地铁站，
站内换乘地铁9号线，
乘坐地铁9号线经过4站，在六里桥东站下车；
约步行128.0米到六里桥东，
乘坐835路经过2站，在长阳环岛南下车；
约步行128.0米到长阳环岛东，
便到达终点长阳环岛东。
朝阳门内到长阳环岛东其他路线：
从朝阳门内到长阳环岛东大概路程34.1公里，全程约需88分钟,途经27个站点，共换乘2次，换乘车辆线路有地铁2号线→地铁4号线大兴线→993路。
从朝阳门内到长阳环岛东大概路程34.07公里，全程约需90分钟,途经28个站点，共换乘2次，换乘车辆线路有地铁2号线→地铁4号线大兴线→646路。
从朝阳门内到长阳环岛东大概路程36.58公里，全程约需90分钟,途经23个站点，共换乘3次，换乘车辆线路有地铁6号线→地铁9号线→地铁房山线→646路。
从朝阳门内到长阳环岛东大概路程35.03公里，全程约需92分钟,途经15个站点，共换乘2次，换乘车辆线路有地铁6号线→地铁9号线→839路。
图吧温馨提示：从朝阳门内到长阳环岛东坐出租（打的）的费用是：125元。
附近相似站点
北京朝阳门内公交站相似的站点：
暂无相似站点
北京长阳环岛东公交站相似的站点：
暂无相似站点
长阳环岛东附近的地铁哪个出口出去能坐907路？
我在长阳环岛东要去朝阳门内中间有几站？需要换乘吗？
从朝阳门内到长阳环岛东，经过哪些公交站点？
从长阳环岛东到朝阳门内怎么走啊？
从朝阳门内到长阳环岛东怎么走啊？
我的看法（20-2000个字）请勿发表反动，色情，暴力等信息
前往论坛发布你的想法前往论坛发布你的想法！前往论坛发布你的想法！前往论坛发布你的想法！
长阳环岛东附近酒店
距长阳环岛东：288米
距长阳环岛东：540米
距长阳环岛东：1022米
距长阳环岛东：1033米
特别行政区…/&app/&storage/&views/&483f1635cebe4ddbdbc02f16
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&PhpEngine.php38
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&CompilerEngine.php45
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php100
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php81
…/&app/&storage/&views/&aa2a4ff0eff88dbaebfea7a75
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&PhpEngine.php38
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&CompilerEngine.php45
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php100
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php81
…/&app/&storage/&views/&bd7c619c04cbc69513ff141
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&PhpEngine.php38
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&Engines/&CompilerEngine.php45
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php100
…/&vendor/&laravel/&framework/&src/&Illuminate/&View/&View.php81
…/&vendor/&laravel/&framework/&src/&Illuminate/&Http/&Response.php70
…/&vendor/&symfony/&http-foundation/&Symfony/&Component/&HttpFoundation/&Response.php141
…/&vendor/&laravel/&framework/&src/&Illuminate/&Support/&Facades/&Response.php29
…/&vendor/&laravel/&framework/&src/&Illuminate/&Support/&Facades/&Response.php45
…/&app/&controllers/&City/&TransferController.php72
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Controllers/&Controller.php138
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Controllers/&Controller.php115
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Router.php985
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Route.php80
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Route.php47
…/&vendor/&laravel/&framework/&src/&Illuminate/&Routing/&Router.php1016
…/&vendor/&laravel/&framework/&src/&Illuminate/&Foundation/&Application.php574
…/&vendor/&laravel/&framework/&src/&Illuminate/&Foundation/&Application.php550
…/&public/&index.php54
ErrorException
Trying to get property of non-object
&!-- style=&vertical-align:& --&
&?php if( $_CITY_WEATHER ): ?&
&a class=&weather& href=&&?php echo URL::route('city_tianqi', [ $_USER_CITY-&letter ] ); ?&&&
&img width=&32& src=&/asset/weather/icon/day/&?php echo sprintf('%02d', $_CITY_WEATHER-&icon); ?&.png& alt=&& /&
&?php echo e($_CITY_WEATHER-&state); ?&
&em&&?php echo e($_CITY_WEATHER-&celsius); ?&℃&/em&
空气质量：&?php echo $_CITY_AQI-& ?&
&span style=&color:&?php echo $_CITY_AQI-&getColor();; ?&&&
&?php echo $_CITY_AQI-& ?&
&!-- style=&vertical-align:& --&
&?php if( $_CITY_WEATHER ): ?&
&a class=&weather& href=&&?php echo URL::route('city_tianqi', [ $_USER_CITY-&letter ] ); ?&&&
&img width=&32& src=&/asset/weather/icon/day/&?php echo sprintf('%02d', $_CITY_WEATHER-&icon); ?&.png& alt=&& /&
&?php echo e($_CITY_WEATHER-&state); ?&
&em&&?php echo e($_CITY_WEATHER-&celsius); ?&℃&/em&
空气质量：&?php echo $_CITY_AQI-& ?&
&span style=&color:&?php echo $_CITY_AQI-&getColor();; ?&&&
&?php echo $_CITY_AQI-& ?&
extract($__data);
// We'll evaluate the contents of the view inside a try/catch block so we can
// flush out any stray output that might get out before an error occurs or
// an exception is thrown. This prevents any partial views from leaking.
include $__
catch (\Exception $e)
if ($this-&compiler-&isExpired($path))
$this-&compiler-&compile($path);
$compiled = $this-&compiler-&getCompiledPath($path);
return $this-&evaluatePath($compiled, $data);
* Get the evaluated contents of the view.
* @return string
protected function getContents()
return $this-&engine-&get($this-&path, $this-&gatherData());
// We will keep track of the amount of views being rendered so we can flush
// the section after the complete rendering operation is done. This will
// clear out the sections for any separate views that may be rendered.
$env-&incrementRender();
$env-&callComposer($this);
$contents = $this-&getContents();
// Once we've finished rendering the view, we'll decrement the render count
&?php echo $__env-&yieldContent('append-js'); ?&
&?php echo $__env-&make('_elements.global_bar', array_except(get_defined_vars(), array('__data', '__path')))-&render(); ?&
&div class=&f-fb&&&/div&
&div class=&g-hd f-cb&&
extract($__data);
// We'll evaluate the contents of the view inside a try/catch block so we can
// flush out any stray output that might get out before an error occurs or
// an exception is thrown. This prevents any partial views from leaking.
include $__
catch (\Exception $e)
if ($this-&compiler-&isExpired($path))
$this-&compiler-&compile($path);
$compiled = $this-&compiler-&getCompiledPath($path);
return $this-&evaluatePath($compiled, $data);
* Get the evaluated contents of the view.
* @return string
protected function getContents()
return $this-&engine-&get($this-&path, $this-&gatherData());
// We will keep track of the amount of views being rendered so we can flush
// the section after the complete rendering operation is done. This will
// clear out the sections for any separate views that may be rendered.
$env-&incrementRender();
$env-&callComposer($this);
$contents = $this-&getContents();
// Once we've finished rendering the view, we'll decrement the render count
&?php echo $__env-&make('_elements.gongjiao.sidebar', array_except(get_defined_vars(), array('__data', '__path')))-&render(); ?&
&?php $__env-&stopSection(); ?&
&?php echo $__env-&make('_layouts.default', array_except(get_defined_vars(), array('__data', '__path')))-&render(); ?&
extract($__data);
// We'll evaluate the contents of the view inside a try/catch block so we can
// flush out any stray output that might get out before an error occurs or
// an exception is thrown. This prevents any partial views from leaking.
include $__
catch (\Exception $e)
if ($this-&compiler-&isExpired($path))
$this-&compiler-&compile($path);
$compiled = $this-&compiler-&getCompiledPath($path);
return $this-&evaluatePath($compiled, $data);
* Get the evaluated contents of the view.
* @return string
protected function getContents()
return $this-&engine-&get($this-&path, $this-&gatherData());
// We will keep track of the amount of views being rendered so we can flush
// the section after the complete rendering operation is done. This will
// clear out the sections for any separate views that may be rendered.
$env-&incrementRender();
$env-&callComposer($this);
$contents = $this-&getContents();
// Once we've finished rendering the view, we'll decrement the render count
// If this content implements the &RenderableInterface&, then we will call the
// render method on the object so we will avoid any &__toString& exceptions
// that might be thrown and have their errors obscured by PHP's handling.
elseif ($content instanceof RenderableInterface)
$content = $content-&render();
* @throws \InvalidArgumentException When the HTTP status code is not valid
public function __construct($content = '', $status = 200, $headers = array())
$this-&headers = new ResponseHeaderBag($headers);
$this-&setContent($content);
$this-&setStatusCode($status);
$this-&setProtocolVersion('1.0');
* @return \Illuminate\Http\Response
public static function make($content = '', $status = 200, array $headers = array())
return new IlluminateResponse($content, $status, $headers);
* @return \Illuminate\Http\Response
public static function view($view, $data = array(), $status = 200, array $headers = array())
$app = Facade::getFacadeApplication();
return static::make($app['view']-&make($view, $data), $status, $headers);
$this-&data['TITLE'] = $
Config::set(&session.driver&, 'array');
$this-&data['TRANSFER'] = $
$this-&data['PLANS'] = $
$this-&data['DESCS'] = $
$this-&data['LINES'] = $
return Response::view('city.transfer.show', $this-&data)
-&setCache([ 'public' =& 1, 'max_age' =& 3600*8 ]);
&#unknown&
$parameters
* @return mixed
protected function callMethod($method, $parameters)
return call_user_func_array(array($this, $method), $parameters);
// after filters on the controller to wrap up any last minute processing.
$response = $this-&callBeforeFilters($router, $method);
$this-&setupLayout();
if (is_null($response))
$response = $this-&callMethod($method, $parameters);
// We will extract the passed in parameters off of the route object so we will
// pass them off to the controller method as arguments. We will not get the
// defaults so that the controllers will be able to use its own defaults.
$args = array_values($route-&getParametersWithoutDefaults());
$instance = $ioc-&make($controller);
return $instance-&callAction($ioc, $me, $method, $args);
&#unknown&
* @return mixed
protected function callCallable()
$variables = array_values($this-&getParametersWithoutDefaults());
return call_user_func_array($this-&getOption('_call'), $variables);
// We will only call the router callable if no &before& middlewares returned
// a response. If they do, we will consider that the response to requests
// so that the request &lifecycle& will be easily halted for filtering.
$response = $this-&callBeforeFilters($request);
if ( ! isset($response))
$response = $this-&callCallable();
// Once we have the route, we can just run it to get the responses, which will
// always be instances of the Response class. Once we have the responses we
// will execute the global &after& middlewares to finish off the request.
$this-&currentRoute = $route = $this-&findRoute($request);
$response = $route-&run($request);
if ($this-&isDownForMaintenance())
$response = $this['events']-&until('illuminate.app.down');
if ( ! is_null($response)) return $this-&prepareResponse($response, $request);
return $this['router']-&dispatch($this-&prepareRequest($request));
* Handles the given request and delivers the response.
* @return void
public function run()
$response = $this-&dispatch($this['request']);
$this['router']-&callCloseFilter($this['request'], $response);
| Once we have the application, we can simply call the run method,
| which will execute the request and send the response back to
| the client's browser allowing them to enjoy the creative
| and wonderful applications we have created for them.
$app-&run();
Server/Request Data
PATH_TRANSLATED
/data/www/gongjiao/public
ORIG_SCRIPT_FILENAME
/data/www/gongjiao/public/index.php/ride/103164.html
HTTP_REFERER
/index.php/ride/103164.html
HTTP_ACCEPT
HTTP_USER_AGENT
Mozilla/4.0 ( MSIE 8.0; Windows NT 6.0; Trident/4.0)
SCRIPT_FILENAME
/data/www/gongjiao/public/index.php
REDIRECT_STATUS
SERVER_NAME
SERVER_PORT
SERVER_ADDR
183.61.9.45
REMOTE_PORT
REMOTE_ADDR
220.177.198.53
SERVER_SOFTWARE
nginx/1.6.2
GATEWAY_INTERFACE
SERVER_PROTOCOL
DOCUMENT_ROOT
/data/www/gongjiao/public
DOCUMENT_URI
/index.php/ride/103164.html
REQUEST_URI
/index.php/ride/103164.html
SCRIPT_NAME
/index.php/ride/103164.html
CONTENT_LENGTH
CONTENT_TYPE
REQUEST_METHOD
QUERY_STRING
/index.php/ride/103164.html
REQUEST_TIME_FLOAT
REQUEST_TIME
Environment Variables
Registered Handlers
0. Whoops\Handler\PrettyPageHandler从朝阳门南到良乡大学城北怎么坐公交车，最快需要多久？
北京公交线路繁多，要到良乡大学城北，首先要熟悉北京良乡大学城北的公交路线情况。从朝阳门南到良乡大学城北怎么走？图吧公交为您提供朝阳门南及良乡大学城北的公交驾乘信息，以及朝阳门南及良乡大学城北的相关信息。让您充分了解从朝阳门南到良乡大学城北怎么走最方便，得多久，如何乘车，打车费用多少等信息。具体路线如下：
最佳路线：
从朝阳门南到良乡大学城北大概路程38.37公里，全程约需80分钟,途经24个站点，共换乘2次，换乘车辆线路有地铁6号线→地铁9号线→地铁房山线。
具体怎么走：
从朝阳门南
约步行464.0米到朝阳门站地铁站，
乘坐地铁6号线经过7站，在白石桥南站下车；
约步行71.0米到白石桥南站地铁站，
站内换乘地铁9号线，
乘坐地铁9号线经过11站，在郭公庄站下车；
站内换乘地铁房山线，
乘坐地铁房山线经过6站，在良乡大学城北站下车；
约步行0.0米到良乡大学城北，
便到达终点良乡大学城北。
朝阳门南到良乡大学城北其他路线：
从朝阳门南到良乡大学城北大概路程37.06公里，全程约需83分钟,途经25个站点，共换乘3次，换乘车辆线路有地铁2号线→地铁1号线→地铁9号线→地铁房山线。
从朝阳门南到良乡大学城北大概路程37.57公里，全程约需88分钟,途经25个站点，共换乘4次，换乘车辆线路有地铁2号线→地铁4号线大兴线→地铁7号线→地铁9号线→地铁房山线。
图吧温馨提示：从朝阳门南到良乡大学城北坐出租（打的）的费用是：133元。
附近相似站点
北京朝阳门南公交站相似的站点：
暂无相似站点
北京良乡大学城北公交站相似的站点：
我按提示去良乡大学城北附近的停车场，很准！很赞！
|（<span id="liqiang）
从良乡大学城北到朝阳门南多长时间？
|（<span id="gzxy1）
我要去距离朝阳门南最近的公寓，怎么走？
我想问一下，北官厅途径朝阳门南站点吗？
从北官厅到朝阳门南需要多长时间？
我的看法（20-2000个字）请勿发表反动，色情，暴力等信息
前往论坛发布你的想法前往论坛发布你的想法！前往论坛发布你的想法！前往论坛发布你的想法！
良乡大学城北附近酒店
距良乡大学城北：798米
距良乡大学城北：818米
距良乡大学城北：1169米
距良乡大学城北：1549米
特别行政区