SN65HVD1050-EP | CAN 产品 | 接口产品 | 描述与参数
SN65HVD1050-EP
(正在供货)
Militart Enhanced Plastic High Speed EMC Optimized CAN Transceiver
&(英文內容)
In English
日本語表示
工具与软件
相关终端应用
The SN65HVD1050 meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a controller area network (CAN). The device is also qualified for use in automotive applications in accordance with AEC-Q100.(2) As a CAN transceiver, this device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps)(3). Designed for operation in especially harsh environments, the SN65HVD1050 features cross-wire, overvoltage, and loss of ground protection from –27 V to 40 V, overtemperature protection, a –12-V to 12-V common-mode range, and withstands voltage transients from –200 V to 200 V, according to ISO 7637. Pin 8 provides for two different modes of operation: high-speed or silent mode. The high-speed mode of operation is selected by connecting S (pin 8) to ground. If a high logic level is applied to the S pin of the SN65HVD1050, the device enters a listen-only silent mode, during which the driver is switched off while the receiver remains fully functional. In silent mode, all bus activity is passed by the receiver output to the local protocol controller. When data transmission is required, the local protocol controller reverses this low-current silent mode by placing a logic low on the S pin to resume full operation. A dominant-time-out circuit in the SN65HVD1050 prevents the driver from blocking network communication with a hardware or software failure. The time-out circuit is triggered by a falling edge on TXD (pin 1). If no rising edge is seen before the time-out constant of the circuit expires, the driver is disabled. The circuit is then reset by the next rising edge on TXD. Vref (pin 5) is available as a VCC/2 voltage reference. The SN65HVD1050M is characterized for operation from –55&C to 125&C.
Controlled Baseline One Assembly/Test Site, One Fabrication Site Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree(1) Improved Replacement for the TJA1050 High Electromagnetic Immunity (EMI) Very Low Electromagnetic Emissions (EME) Meets or Exceeds the Requirements of ISO 11898-2 Bus-Fault Protection of –27 V to 40 V Dominant Time-Out Function Thermal Shutdown Protection Power-Up/Down Glitch-Free Bus Inputs and Outputs High Input Impedance With Low VCC Monotonic Outputs During Power Cycling APPLICATIONS Industrial Automation DeviceNET™ Data Buses (Vendor ID #806) SAE J2284 High-Speed CAN for Automotive Applications SAE J1939 Standard Data Bus Interface ISO 11783 Standard Data Bus Interface NMEA 2000 Standard Data Bus Interface
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. (2) The device is available with Q100 qualification as the SN65HVD1050Q (Product Preview). (3) The signaling rate of a line is the number of voltage transitions that are made, per second, expressed in the units bps (bits per second). DeviceNET is a trademark of Open Devicenet Vendors Association, Inc.
查看更多内容
其它合格版本 SN65HVD1050-EP
Q100 适用于追求零缺陷的高可靠性汽车电子应用的器件
TI 的标准目录产品
Supply Voltage(s)
Bus Fault Voltage
Signaling Rate
Low Power Mode
Operating Temperature Range
Package Group
Package Size: mm2:W x L (PKG)
SN65HVD1050-EP
4.75 to 5.25&
-27 to 40&
High Speed Vref Pin&
-55 to 125&
HiRel Enhanced Product&
8SOIC: 29 mm2: 6 x 4.9(SOIC)&联系我们 CONTACT US
传真： 020-
邮编： 510641
地址： 广州市天河区思成路23号宏太智慧谷7栋501房
新品上市 PRODUCTS
根据待测的参数，把采样线以及相应的传感器在开机之前连接好，开机之后在通电的情况下不能随意拆卸已经连接好的物件，...
发动机爆震或者说爆炸是指燃烧室内的未燃烧的燃料未能平缓燃烧，而是发生了相对剧烈的爆炸事件。发动机爆震非常危险，...
MDX-600系列蓄电池测试仪是20多年蓄电池测试仪开发,生产和销售经验与不断技术创新的结晶,这些经验和创新来自于我们...
LeafLightv2为电脑与CAN总线网络之间的桥接，提供最便捷与成本相宜的解决方案。LeafLightv2提供高速USB接口...
新闻中心 NEWS
Copyright ?
广州智维电子科技有限公司TO-CAN系列产品
最近被加入的企业
名片夹还没有企业信息，赶紧查看企业联系方式加入吧！
『深圳市亿洋鑫光电有限公司』的联系方式为，755-，联系人：于燕华 &nbsp
EL产品优质精品供应商推荐
品牌/厂家：其他
报价30.50元/个
企业评分：
品牌/型号：美国AOI/DFB1.25G 2.5G　4.3G 接口类型：SC LC传输距离：40（m）km发射波长：850 980 （nm）
以上是TO-CAN系列产品的详细介绍，包括TO-CAN系列产品的价格、型号、图片、厂家等信息!
代理美国AOI公司产品：TO-CAN其产品的传输速率：1.25G、2.5G、4.3G、4.5G适用于1.25G、2.5G、4.3G、4.7G等收发模块是广电、通信等信号传输的关键器件。&&&
商机库包括所有采购、招标信息的汇总
与TO-CAN系列产品相关的产品信息
TO-CAN系列产品产品相关搜索
最新收发器产品
按排行字母分类：
我需要采购收发器，请供应商联系我....
马可波罗&&全心服务
联系电话：*
允许同品类其他优质供应商联系我
联系电话：
优质精品供应商推荐：全部 产品 下载资料 技术文章 新闻 行业文章
CAN总线分析仪与记录仪
工业CAN卡与转换器
CAN网络拓展与保护
CAN数据采集模块
CANopen与DeviceNet协议产品
CAN教学实验开发产品
轨道交通地铁车辆中，利用CAN通讯其出色的实时性与纠错能力，提升了车辆各部件的控制效率和可靠性，但在地铁运营中，某些线路也会出现偶...
CAN总线一直以实时性强、传输距离远、抗干扰能力强、数据保证到达等特点而广泛应用于高可靠性的场合，但总的来说都离不开CAN_H和C...
德国的CAN-bus总线工程师为了方便学习和记忆CANopen协议，随身携带一本“CANopen备忘录”，在研发和现场测试时快速查...
致远领军CAN-Bus进入无线时代 CANWIFI-200T转换器实现CAN-Bus数据和WiFi数据相互传输的功能，内部集成了2路的CAN-Bus接口，1路WLAN接口和1路LAN接口，并自带TCP/IP或者UDP协议栈，用户利用它可以轻松完成CAN-Bus网络和WiFi网络的互连互通，大大扩展CAN-Bus网络的应用范围。